Kolo Verify
Home interiors · Stage 14 of 15: Switching it on

Second-fix electrical and fittings checks in Kerala

By the Kolo home interiors team · Updated

Nothing new gets covered here - this stage closes the loop on everything that was. Every point tested live, every reading recorded, while the vendor is still on your site.

The checks at this stage (3)

  1. Every point tested live and recorded

    Every switch, socket and light tested working; every tap and joint checked for leaks; readings taken per circuit and written down. This is the loop-closing week for everything buried earlier - and it only happens while the vendor is still on site.

  2. Every outlet, switch and fitting tested under load

    A socket that is wired but never tested is found by the person who plugs something into it. At second fix everything is finally reachable — after handover, half of it is behind furniture.

  3. CP fittings run, and traps checked for leaks and smell

    A tap that runs is not a tap that is finished. Leaks at the connection and a missing trap seal both show up after you move in, and both are trivial to catch now.

What good work looks like

Every point proven live

The closure walk: every switch works its light, every socket takes a load, every regulator turns, every tap runs and every joint stays dry - walked room by room with the point list in hand, defects logged on the spot. Cheap while the vendor's electrician is on site; expensive forever after.

Good signs
  • Every point on the list tested working
  • Wet joints and weeps caught at the walk, not later
  • Defects logged per point, on the spot
Warning signs
  • A sample of points standing in for the list
  • Leaks discovered by the cabinet under the sink
  • The walk deferred past the vendor's last day

Readings on paper, per circuit

The insulation reading per circuit, the earth check, and the appliance-point load tests go onto signed records - not into a verbal all-fine. These are the documents a future electrician, a warranty claim, or a sale will ask for; they exist only if they are collected this week.

Good signs
  • Per-circuit readings on a signed record
  • Appliance points load-tested and noted
  • Records handed to you, not filed with the vendor
Warning signs
  • One global assurance covering all circuits
  • Certificates promised with the final bill
  • Records that exist only in the vendor's folder

IS 732

Series and brand at the faceplate

Second fix is where series substitution hides in plain sight: the same brand's logo on a cheaper series of plates, taps and accessories. The carton, not the logo, tells the truth - each is checked against the specified series before fixing, while an exchange is still a phone call.

Good signs
  • Cartons checked against the specified series
  • Substitutions surfaced before fixing, not after
  • The specified finish - not a near shade - on the wall
Warning signs
  • The logo accepted as proof of the series
  • Cartons discarded before anyone looked
  • A near-enough finish argued about after fixing

Red flags and money traps

Same logo, cheaper series

Second fix is where series substitution hides: the brand's logo on a lower series of plates, taps and accessories. The carton tells the truth the faceplate hides - check it against the spec before fixing, while exchange is a phone call.

The carton: Every carton against the specified series - before it goes on the wall.

Chat with us